Cleaning Products

E2 for TIN OXIDE Sensors

Eclipse E2 lens cleaner is the highest purity Tin Oxide CCD cleaner now available, containing less than 5 parts per million (ppm) of contamination (the whitish residue left after evaporation) It dries as quickly as it can be applied leaving absolutely no visible residue, making it the only recommended cleaner for Indium Tin Oxide coated CCD and CMOS sensor cleaning when used with Sensor Swabs.

ECLIPSE Optic Cleaner

ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be applied leaving absolutely no residue. When used with PEC*PAD photo wipes, it is possible to clean only the portion of lens which is dirty eliminating "hazy swirls". Dispense several drops onto a clean, folded PEC*PAD and lightly wipe surface in a single direction. Refold pad to expose a clean side and re-wipe as necessary. Other lens tissues may not work as well, and some experimentation may be required. Each box contains a 59 ml. (2 fl. oz.) bottle with dropper applicator tip.

CCD Cleaning Swabs

Sensor Swabs™ are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. "Sensor Swab Type 1". Recommended by Eastman Kodak Company for cleaning the DCS family of digital cameras when used with ECLIPSE Optic Cleaner (sold separately). Fuji recommends Eclipse and Sensor Swabs for cleaning their S1, S2 & S3 Digital Pro Cameras whereas LEICA CAMERA AG recommends sensor swabs for cleaning the LEICA S1 CCD chip." (when used without liquid) Sensor Swabs are also ideal for cleaning other recessed imaging surface.

PEC*PADs Photo Wipes

PEC*PADs are the ideal photo wipes for those who hate photo wipes! PEC*PADs are extremely strong, lint-free and so soft and pure (99.999%) it is almost impossible to scratch an emulsion with them. PEC*PADs are so soft they can be safely used to clean all types of sensitive surfaces: scanners, CD's, mirrors, lenses, telescopes etc.

BRUSHOFF™ Brush

BRUSHOFF™ is unlike any other sensor brush on the market. The BRUSHOFF design evolved from a NASA design and engineered to meet their rigorous requirements and specifications. BRUSHOFF is conductive because the dust and lint that attaches to the sensor or lens surface is attached there electronically [dust has a negative charge and the sensor/ lens a positive one]. Breaking that electronic bond is the only way to both remove the debris and discharge the sensor or lens surface so new particles are not again immediately attracted to it.